HEAT-SEAL INSTRUCTIONS
(From the manufacturers website)
)A.
We strongly recommend that you use a
heat-seal machine or heat transfer machine.
-
Set your
machine temperature at 375 degrees.
-
Place the
appliqué where you want and place a pressing cloth over the
appliqué.
-
Close the
machine shut with appliqué inside and hold it for 12-15
seconds.
-
Let the
appliqué cool down.
Note: These
instructions are ideal for regular tee-shirt like fabrics. The
pressing time varies for thicker fabrics. In some cases, it is
suggested that you turn the garment inside out and repeat steps
1-4. For heat-seal machine
information, feel free to call us. We can provide you heat
transfer machine information.
B.
Using a Hand Iron.
-
Set your hand
iron at the hottest temperature setting.
-
Place your
appliqué where you desire and place a pressing cloth over
the appliqué.
-
Press the iron
down on the appliqué and hold it for 30-40 seconds. (add as
much pressure as possible).
-
Turn the
garment inside out and repeat steps 1-3.
-
Let the
appliqué cool down.
STICK-ON
APPLIQUÉS
A. No iron
required! Just peel off the paper on the back of the appliqué
and stick it on.
Caution
A. Avoid the use of materials that cannot ensure the
temperature necessary to affix patches properly.
B. Appliqués are durable, but for best results, they should not
be applied to rainwear (water-proof), highly elastic fabrics, or
nylon fabrics.
WASHING
INSTRUCTIONS
Recommended: Dry
Clean or Machine Wash. For Machine wash, please turn garment
"inside-out" before wash. Settings: Warm
with delicate cycle. Tumble dry low.
